Supplied with:
- TX3820V radio
- Instruction manual
- Mounting bracket
- DC lead
- Microphone
- Microphone clip
TX3820V VHF Commercial Radio
The TX3820V is built for VHF 136-174 MHz and comes packed with an impressive list of features. With its 'Flash' upgradeable microprocessor and flexible programming, future upgrading of your two-way radio requirements becomes a reality. The compact modular design of the TX3820V incorporates a rugged die-cast aluminium chassis which allows it to withstand constant vibration and extreme temperatures.
The TX3820V provides a full 25 Watts of output power without compromising the size of the radio.
Taking advantage of the full diecast chassis and top cover, this design allows the unit to dissipate the heat generated by the 25 Watt output power whilst providing a very rugged and robust radio. GME is so confident in the design we offer a full two (2) year manufacturer's warranty.
Installation is simple. Measuring just 128 mm (W) x 165 mm (L) x 29 mm (H) the TX3800 easily fits into the confines of modern vehicles. For traditional DIN sized console mounting the MBD001 DIN adaptor kit allows the TX3800 to be easily installed or removed. The built-in speaker can be mounted facing either upwards or downwards for clear audio.
Features
- radio
Specifications
| GENERAL | |
|---|---|
| Compliant Specification | Compliant with Australian Test Standard AS4295 |
| Frequency Bands | 136 - 174 MHz |
| Number of Channels | 99 |
| Channel Spacing | 25 kHz / 12.5 kHz (N) Version |
| Frequency Stability | +/- 1khz VHF (-10 to +60) |
| Modulation | Direct FM |
| Operation Mode | Simplex or half duplex with repeater talk-around |
| Scanning Speed | Selectable 50/100/200 ms per channel |
| Antenna Impedance | 50 Ohms nominal |
| Antenna Connector | BNC (chassis mount) |
| Nominal Voltage | 13.8 volts DC negative earth |
| Operating Voltage Range | 10.8 - 15.6 volts |
| Test Voltage | 13.8 volts DC |
| Reverse Polarity Protection | 18 volt diode crowbar |
| D.C. Current | 0.2 amps receive (power save < 60 mAh) | 6 amps (UHF) transmit into 50 Ohms |
| TRANSMITTER | |
| Operating Temperature Range | -10 °C to +60 °C |
| RF Output | High: 25 watts max | Low: 5 watts adjustable |
| Transmit Duty Cycle | 25% at maximum output (25 watts) |
| RF Switching Bandwidth | VHF 38 MHz |
| Deviation Limiting | ±2.5 kHz or ±5 kHz at +20 dB AF limiting |
| Pre-Emphasis | +6 dB per Octave |
| AF Distortion | 3% below limiting |
| Residual Modulation | -40 or -45 dB |
| RECEIVER | |
| Sensitivity Spurious Outputs | -122 dB for 12 dB SINAD (CCIR) < -75 dBc (Compared to carrier) |
| Circuit Type | Double conversion superheterodyne |
| RF Switching Bandwidth | VHF-38 MHz |
| Intermediate Frequencies | 1st: 21.4 / 38.85 MHz | 2nd: 450 kHz |
| Sensitivity | -121 dBm for 12 dB SINAD unweighted |
| IF Frequencies | 45mhz |
| Adjacent Channel Selectivity | -73 dB/-65db (WB/NB) |
| Intermodulation | 74 dB |
| Blocking | > 100 dB |
| Spurious Rejection | > 75 dB |
| Audio Power | 3 watts average into 4 Ohms |
| Audio Signal to Noise | > 45 dB / 40 db (WB/NB) unweighted |
| Conducted Spurious Emission | < -80 dBm |
| Dimensions | 29 (H) x 127 (W) x 163 (D) mm |
| Weight | 614 grams |

