TX3510 DSP Compact UHF CB radio

TX3510 DSP Compact UHF CB radio TX3510 DSP Compact UHF CB radio TX3510 DSP Compact UHF CB radio
TX3510 TX3510 DSP Compact UHF CB radio TX3510 DSP Compact UHF CB radio TX3510 DSP Compact UHF CB radio

TX3510 DSP Compact UHF CB radio

  

UHF radio powered by digital signal processing for Pure Sound

The compact fully featured TX3510 has an impressive list of both advanced and standard features, many of which have never been seen before in a UHF CB Radio. With the latest in DSP technology providing a comprehensive feature set coupled with rugged construction, ease of installation and renowned GME reliability, the TX3510 has rewritten the standard for UHF CB radios.

DISCONTINUED

Product Details

  • User adjustable full spectrum LCD backlight
  • Advanced signal management
  • Dynamic volume control
  • Voice inversion scrambler
  • Rotary channel and volume controls
  • Push button squelch control
  • Open and group scan
  • Rear mic option
  • Memory channel quick select
  • CTCSS and DCS
  • Duplex
  • 5 digit selcall with quiet mode
  • Digital signal strength meter
  • 95 user programmable extra receive channels (403-520 MHz)
  • 3 year warranty

In the Box:

  • TX3510 radio unit
  • Mounting Cradle
  • Microphone
  • Microphone Clip
  • DC Lead
  • Screw Pack
  • Instruction Manual

Product Specifications

GENERAL

Compliant Specification
Meets AS/NZS 4365 for radio communications equipment in the UHF citizen and personal radio service.
Frequency Range TX
476.425-477.4125 MHz
Number of Channels
80
Channel Spacing
12.5 kHz
Operation Mode
Simplex or half Duplex with repeater talk around.
Scanning Speed
25 ms per channel (40 channels per second).
Antenna Impedance
50 Ohms nominal
Nominal Battery Voltage
12 volts DC
Operating Voltage Range
10-16 volts DC
Battery Polarity
Negative Earth
Standard Test Voltage
13.8 volts DC
Overvoltage Protection
30 volts DC maximum. At 18 volts DC the channel display flashes ‘Hi DC’ for 5 seconds on receive. The RF power is reduced and TX flashes on transmit.
Reverse Voltage Protection
Diode Crowbar
Overcurrent Protection
In-line 2 amp fuse
Operating Temperature
-10°C to 60°C

TRANSMITTER

RF Output
5 watts
Spurious Emission
< - 70 dBc
Frequency Error
< ± 1.5 kHz
Modulation
FM
Maximum Deviation
< ± 2.5 kHz at + 20 dB AF limiting.
Transmit Frequency Response
+6 dB per octave 300 Hz to 3 kHz +1-3 dB
Demodulated Audio Signal to Noise
> 45 dB unweighted
Current Consumption
1.7 Amps with 50 Ohm termination

RECEIVER

Intermediate Frequencies
38.85 MHz, 450 kHz
Sensitivity
-122 dBm for 12 dB SINAD unweighted
Selectivity
-6 dB at + 3.5 kHz -60 dB at ± 12.5 kHz
Intermodulation Immunity
-72 dB
Blocking Immunity
-98 dB
Spurious Response Immunity
70 dB
Audio Output Power
3 watts average into 4 Ohms
Audio Signal to Noise
> 45 dB unweighted
IF Frequencies
<175 mA muted 750 mA full volume
Conducted Spurious Emission
<70 dBm

MECHANICAL SPECIFICATIONS

Dimensions
29 (H) x 128 (L) x 117 (D) mm
Weight
450 grams
Antenna
SO239 panel socket
External Speaker
3.5 mm mono jack
Microphone Port
6 way telephone style with rubber strain relief
  • User adjustable full spectrum LCD backlight
  • Advanced signal management
  • Dynamic volume control
  • Voice inversion scrambler
  • Rotary channel and volume controls
  • Push button squelch control
  • Open and group scan
  • Rear mic option
  • Memory channel quick select
  • CTCSS and DCS
  • Duplex
  • 5 digit selcall with quiet mode
  • Digital signal strength meter
  • 95 user programmable extra receive channels (403-520 MHz)
  • 3 year warranty

In the Box:

  • TX3510 radio unit
  • Mounting Cradle
  • Microphone
  • Microphone Clip
  • DC Lead
  • Screw Pack
  • Instruction Manual

GENERAL

Compliant Specification
Meets AS/NZS 4365 for radio communications equipment in the UHF citizen and personal radio service.
Frequency Range TX
476.425-477.4125 MHz
Number of Channels
80
Channel Spacing
12.5 kHz
Operation Mode
Simplex or half Duplex with repeater talk around.
Scanning Speed
25 ms per channel (40 channels per second).
Antenna Impedance
50 Ohms nominal
Nominal Battery Voltage
12 volts DC
Operating Voltage Range
10-16 volts DC
Battery Polarity
Negative Earth
Standard Test Voltage
13.8 volts DC
Overvoltage Protection
30 volts DC maximum. At 18 volts DC the channel display flashes ‘Hi DC’ for 5 seconds on receive. The RF power is reduced and TX flashes on transmit.
Reverse Voltage Protection
Diode Crowbar
Overcurrent Protection
In-line 2 amp fuse
Operating Temperature
-10°C to 60°C

TRANSMITTER

RF Output
5 watts
Spurious Emission
< - 70 dBc
Frequency Error
< ± 1.5 kHz
Modulation
FM
Maximum Deviation
< ± 2.5 kHz at + 20 dB AF limiting.
Transmit Frequency Response
+6 dB per octave 300 Hz to 3 kHz +1-3 dB
Demodulated Audio Signal to Noise
> 45 dB unweighted
Current Consumption
1.7 Amps with 50 Ohm termination

RECEIVER

Intermediate Frequencies
38.85 MHz, 450 kHz
Sensitivity
-122 dBm for 12 dB SINAD unweighted
Selectivity
-6 dB at + 3.5 kHz -60 dB at ± 12.5 kHz
Intermodulation Immunity
-72 dB
Blocking Immunity
-98 dB
Spurious Response Immunity
70 dB
Audio Output Power
3 watts average into 4 Ohms
Audio Signal to Noise
> 45 dB unweighted
IF Frequencies
<175 mA muted 750 mA full volume
Conducted Spurious Emission
<70 dBm

MECHANICAL SPECIFICATIONS

Dimensions
29 (H) x 128 (L) x 117 (D) mm
Weight
450 grams
Antenna
SO239 panel socket
External Speaker
3.5 mm mono jack
Microphone Port
6 way telephone style with rubber strain relief