TX7200 UHF 5 watt commercial handheld radio

TX7200 UHF 5 watt commercial handheld radio  TX7200 UHF 5 watt commercial handheld radio  TX7200 UHF 5 watt commercial handheld radio
TX7200 TX7200 UHF 5 watt commercial handheld radio  TX7200 UHF 5 watt commercial handheld radio  TX7200 UHF 5 watt commercial handheld radio

TX7200 UHF 5 watt commercial handheld radio

RRP $599.50 AUD Inc GST

A rugged Australian made hand held portable commercial radio

The TX7200 is built to last with a robust die-cast chassis and tough ABD/Polycarbonate construction. Designed for simple 'no fuss' operation, the TX7200 comes as a simple six assignable soft key version. The TX7200 is packed with high performance features which can be dealer programmed to meet the individual user's present and future requirements.

The TX7200 has a 125 channel capacity which can be further extended with all CBRS UHF channels. The TX7200 is powered by a high quality 1500 mAh NiMH battery pack. Battery life is extended with an automatic receiver 'sleep' mode and 'quiet' mode. Audible and visual alarms warn the user of low batter voltage.

The TX7200 is 100% Australian made with ultra-miniature surface mounted components using the latest in solder reflow techniques for high performance and reliability. A rugged diecast metal chassis houses the circuit boards inside a tough polycarbonate case. The TX7200 meets the MIL-STD810C/D/E standards for shock, vibration, humidity, dust and moisture. An extensive range of accessories is available for the TX7200.

Connect the TX7200 to the MC001 Speaker/Microphone and the user has a fully featured Mobile installation. The TX7000 can be used within any portable network and is the perfect partner for both the TX3600 and RP3600 repeater.

Product Details

  • Wide band / Narrow band programmable by channel
  • Open and Group Scan Modes
  • User selectable channels per scan group
  • 5 Digit Selcall with Quiet Mode
  • 10 Selcall memories with alphanumeric tagging
  • ANI
  • Three level squelch setting
  • Priority channel key
  • Instant channel recall
  • CTCSS with silent mode
  • DTMF tones for PSTN connect
  • Selectable Hi/Low TX power
  • Battery level indicator
  • Monitor button
  • Quiet mode
  • Key lock
  • Surface mount technology
  • Australian made

In the Box:

  • Flexible Antenna
  • 1500 mAh Ni-MH Battery Pack
  • Belt Clip

Product Specifications

GENERAL

Compliant Specification
AS/NZS4295
Frequency Range TX
450 - 520 MHz
Number of Channels
124
Channel Spacing
25 kHz / 12.5 kHz
Operation Mode
S implex or half duplex
Scanning Speed
40 ms per channel (25 channels per second)
Antenna Impedance
50 Ohms nominal
Nominal Battery Voltage
7.2 volts DC nominal
Operating Voltage Range
6 - 9 volts DC
Reverse Voltage Protection
Shunt Diode
Operating Temperature
-10° C to +60° C
Frequency stability
± 2.5 PPM

TRANSMITTER

RF Output
High: 5 watts, Low: 1 watt
Spurious Emission
< - 30 dBm
Modulation
FM
Maximum Deviation
< ± 5 kHz at + 20 dB limiting (25 kHz), < ± 2.5 kHz at + 20 dB limiting (12.5 kHz)
Transmit Frequency Response
+ 6dB per octave 300 Hz to 3 kHz, + 1, - 3 dB

RECEIVER

Intermediate Frequencies
1st: 21.7 MHz, 2nd: 450 kHz
Sensitivity
- 121 dBm for 12 dB SINAD
Selectivity
65 dB (25 kHz), 60 dB (12.5 kHz)
Intermodulation Immunity
72 dB
Blocking Immunity
95 dB
Audio Output Power
0.5 watts at <10% distortion
Audio Signal to Noise
> 45 dB
Audio signal to noise: 12.5Khz
> 40 dB unweighted
Current consumption
1.8 amps @ 5 watts, 0.8 amps @ 1 watt
IF Frequencies
15 mA sleep mode, 45 mA muted, 190 mA full volume

MECHANICAL SPECIFICATIONS

Dimensions
135mm (W) x 63mm (D) x 40mm (H)
Weight
390 grams
Antenna
TNC female
  • Wide band / Narrow band programmable by channel
  • Open and Group Scan Modes
  • User selectable channels per scan group
  • 5 Digit Selcall with Quiet Mode
  • 10 Selcall memories with alphanumeric tagging
  • ANI
  • Three level squelch setting
  • Priority channel key
  • Instant channel recall
  • CTCSS with silent mode
  • DTMF tones for PSTN connect
  • Selectable Hi/Low TX power
  • Battery level indicator
  • Monitor button
  • Quiet mode
  • Key lock
  • Surface mount technology
  • Australian made

In the Box:

  • Flexible Antenna
  • 1500 mAh Ni-MH Battery Pack
  • Belt Clip

GENERAL

Compliant Specification
AS/NZS4295
Frequency Range TX
450 - 520 MHz
Number of Channels
124
Channel Spacing
25 kHz / 12.5 kHz
Operation Mode
S implex or half duplex
Scanning Speed
40 ms per channel (25 channels per second)
Antenna Impedance
50 Ohms nominal
Nominal Battery Voltage
7.2 volts DC nominal
Operating Voltage Range
6 - 9 volts DC
Reverse Voltage Protection
Shunt Diode
Operating Temperature
-10° C to +60° C
Frequency stability
± 2.5 PPM

TRANSMITTER

RF Output
High: 5 watts, Low: 1 watt
Spurious Emission
< - 30 dBm
Modulation
FM
Maximum Deviation
< ± 5 kHz at + 20 dB limiting (25 kHz), < ± 2.5 kHz at + 20 dB limiting (12.5 kHz)
Transmit Frequency Response
+ 6dB per octave 300 Hz to 3 kHz, + 1, - 3 dB

RECEIVER

Intermediate Frequencies
1st: 21.7 MHz, 2nd: 450 kHz
Sensitivity
- 121 dBm for 12 dB SINAD
Selectivity
65 dB (25 kHz), 60 dB (12.5 kHz)
Intermodulation Immunity
72 dB
Blocking Immunity
95 dB
Audio Output Power
0.5 watts at <10% distortion
Audio Signal to Noise
> 45 dB
Audio signal to noise: 12.5Khz
> 40 dB unweighted
Current consumption
1.8 amps @ 5 watts, 0.8 amps @ 1 watt
IF Frequencies
15 mA sleep mode, 45 mA muted, 190 mA full volume

MECHANICAL SPECIFICATIONS

Dimensions
135mm (W) x 63mm (D) x 40mm (H)
Weight
390 grams
Antenna
TNC female